![]() ![]() Ĭarbon V-Mount has ID of 13.7mm / 0.54" and weighs 5.5grams / 0.194 oz.ĭifferent length bolts are also provided with the V-mount. The wide end diameter is 19 mm / 0.74", and the narrow end diameter is 12.5 mm / 0.49". The carbon tail boom is 700 mm / 27.55" long and weighs 23g / 0.81 oz. Materials are strategicaly oriented, so the boom has maximum strength and minimum weight. The carbon tailboom is made from several carbon types. The final color is white - gelcoat, resistant to fraying and resistant to UV rays. Canopy is designed in a way that there is enough space to easily manipulate with all components in the pod, allowing the battery to be inserted and connected easily, improving usability on the field. For example, the edges around the canopy are reinforced with carbon. The pod is reinforced with carbon on strategic spots which gives it more strength. The pod is entirely made of fiber glass and carbon, it is very light and strong, whilst being 2.4 GHz friendly. The vertical stabilizer has a pre-prepared slot made of carbon tube so it is easily attached to the pod's carbon tail boom. The hinges on the vertical stabilizer are made of kevlar ensuring smooth operation. The tail is made of balsa with carbon cap strips on both sides, giving it the necessary resistance to stress. ![]() The flaps are on the whole surface of the centroplan and it has a built-in kevlar hinge. The trailing edge is made of carbon, and there are carbon cap strips on the upper and lower side of the ribs, which are reinforcing the whole construction. Ultimately, it is wrapped in kevlar, giving it even greater strength combined with the hybrid D-Box. The main spar is made of balsa, reinforced with carbon and covered with glass. The main construction of the wings is built with full balsa ribs, while composite materials are used for other components.įor the carbon D-Box a 1K Aero hybrid carbon/aramid material of highest quality is used. The centerpanel is made as a single segment, the mid panel is another segment, and the two are joined with carbon joiners and have pre-prepared pins so that everything fits together perfectly. The wing is constructed so that the centerpanel is straight, while the mid and tip panels are angled, which gives the model good stability and easy handling during flight. bowdens and controls for connecting moving surfacesĪdditional details for each segment of the model can be found below. carbon rudder horns, u-nuts and various bolts for mounting completed mainspar ready for mounting and glueing + additional carbon rods for the mainspar custom made kevlar hinges for flaps and moving surfaces carbon wing joiner, carbon servo cover and other carbon small parts hybrid carbon/aramid dbox, carbon trailing edge, carbon cap strips composite pod, carbon tailboom and carbon v-mount laser cut ribs and all other required parts CNC cut jig from styrofoam (underside of wings) for easier wing glueing detailed building manual with step-by-step images It is the same as with recreational flying: it will guarantee a great flight day and great fun. Since it is so light with excellent performance, Elemental 2 is designed for flying in various categories and other competitions where you need to stand out when there is little or low thermals. It comes in rudder, elevator, flaps (REF) version. The stronger version is about 30 grams / 1.05 oz heavier than the standard version. The difference between standard and strong version of RC model Elemental 2 is in the reinforced mainspar and stronger D-box which is made with stronger carbon. It is also very light, giving it amazing characteristics when sailing. The model is constructed using full-carbon parts, so strength-to-mass ratio is ideal. Due to its aerodynamic design and excellent performance, it is very stable and is a joy to fly. The components of the KIT model are coming from a pure glider - light hybrid version, with a wingspan of 2m / 78.74". Very easy and fast assembly and provides excellent performance, it is very stable and is a joy to fly.ĬLM Pro has released a new model called Elemental 2. Unassembled KIT version - pure glider / light hybrid carbon/aramid version. ![]() Description CLM Pro newest RC model Element 2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |